• Brand
  • Products
  • Store
  • Support

Support and Service

Downloads : Firmware Update

Thank you for using a PENTAX K-3 Mark III digital camera.
RICOH IMAGING COMPANY, LTD. wishes to announce the release of Firmware Update Software Version 2.13 for PENTAX K-3 Mark III.
Firmware in this document is the software that runs inside digital cameras.
This firmware contains open-source software. The applicable license is listed in a text file within the download file.

Changes from V2.12 to V2.13
  • Corrected - When using the camera with combination of ImageSync, certain characters in the wireless LAN password may cause unstable operation in rare cases.
    • * When this update is done, the contents of version 2.12 and earlier will be also updated.
    • * When this update is done, you will not be able to restore back to version 2.12 or earlier.
Changes from V2.11 to V2.12

[Enhanced features]

  • The following model has been added to the lens subject to the focus limiter function.
    HD PENTAX-DA 35mmF2.8 Macro Limited.

[Others]

  • Improved stability for general performance.
    • * When this update is done, the contents of version 2.11 and earlier will be also updated.
    • * When this update is done, you will not be able to restore back to version 2.11 or earlier.
Changes from V2.10 to V2.11
  • Improved stability for general performance.
  • * When this update is done, the contents of version 2.10 and earlier will be also updated.
  • * When this update is done, you will not be able to restore back to version 2.10 or earlier.
Changes from V2.01 to V2.10

[Enhanced features]

  • Added custom image [Gold].
  • Added [While Pressed] function to customize of Fx Button.
    [MENU] – [C: Customization] – [ 2⃣ Customize Controls] – [Fx Button]
    -Added customization option that functions while the Fx button is pressed. The Fx button can be customized and registered to 10 buttons such as [User AF (While Pressed)] and [AE Lock (While Pressed)]
    -Some of the functions and button customization can be set in detail.
    -After determining the button assignment, press the INFO button on the [Fx button] screen to set the details of the selected function.

    *The items that can be set from the INFO button are as follows
    -User AF (While Pressed)
    -AE Lock (while Pressed)
    -Preset Sv (While Pressed)
    -Preset Tv (While Pressed)
    -Preset Av (While Pressed)
    -AE Metering (While Pressed)
    -Flash Mode (While Pressed)
    -HDR Capture (While Pressed)
    -AA Filter Simulator (While Pressed)
    -One touch RAW+
    -Crop
    -Shake Reduction
    -Key Lock
    -Shooting Info Display (While Pressed)

    For more details clickhere

[Others]

  • Improved stability for general performance.
  • * When this update is done, the contents of version 2.01 and earlier will be also updated.
  • * When this update is done, you will not be able to restore back to version 2.01 or earlier.
Changes from V2.00 to V2.01
  • Simplified fonts have been updated.
  • * When this update is done, the contents of version 2.00 and earlier will be also updated.
  • * When this update is done, you will not be able to restore back to version 2.00 or earlier.
Changes from V1.80 to V2.00

[Additional features]

  • Added limited function [Grad ND Shooting].
  • * A special activation key (release key) obtained from a website or other source is required to activate the limited functions.
    Note: The Grad ND Shooting activation key issuance is a service that will be launched first in Japan. the launch of this service outside of Japan has not yet been determined.

[Enhanced features]

  • Added Type 3 to the item of the AF.C tracking AF point method.
  • Added focus sensitivity setting item for AF.C.
  • Added USER mode setting [BOX] write/read function. For more details click here

[Others]

  • Improved the number of consecutive frames when shooting with crop.
  • Improved stability for general performance.
  • * When this update is done, the contents of version 1.80 and earlier will be also updated.
  • * When this update is done, you will not be able to restore back to version 1.80 or earlier.
Changes to V1.80

[Enhanced features]

  • Added custom image Special Edition [HARUBENI]. For more details click here
  • * It can be used when attaching the following compatible lenses.
    HD PENTAX-FA 77mmF1.8 Limited
    HD PENTAX-DA 20-40mmF2.8-4 ED Limited DC WR

[Others]

  • Corrected --- Some functions are not displayed in the control panel in movie mode in version 1.70.
  • * If you have customized the movie mode control panel in version 1.70, after updating to version 1.80, please reset the registered contents of control panel to initial state or re-customize it.
  • Improved stability for general performance.
  • * When this update is done, the contents of version 1.70 and earlier will be also updated.
  • * When this update is done, you will not be able to restore back to version 1.70 or earlier.
Changes to V1.70

[Enhanced features]

  • Added custom image Special Edition [FUYUNO]. For more details click here
  • * It can be used when attaching the following compatible lenses.
    HD PENTAX FA 31mmF1.8 Limited
    HD PENTAX-DA 35mmF2.8 Macro Limited
  • Added focus limiter function
  • * It can be used when attaching the following compatible lenses.
    HD PENTAX-D FA MACRO 100mmF2.8ED AW
  • Added [AF Point for H/V Comp] for AF with viewfinder shooting and AF with live-view shooting. The reference position and movement position of the focus point can be maintained for each of the vertical and horizontal compositions.
  • [Select (XS)] has been added to the AF area for AF with viewfinder shooting and pinpoint focus point can be selected more precisely than with SELECT(S).
  • Added [1.7x] to crop.

[Others]

  • Improved performance when panning in the diagonal direction in the [Panning] mode of [Shake Reduction].
  • Improved stability for general performance.
  • * When this update is done, the contents of version 1.60 and earlier will be also updated.
  • * When this update is done, you will not be able to restore back to version 1.60 or earlier.
Changes to V1.60

[Enhanced features]

  • * Added custom image Special Edition [KYUSHU]. For more details click here
  • * It can be used when attaching the following compatible lenses.
    HD PENTAX FA 43mmF1.9 Limited
    HD PENTAX-DA 70mmF2.4 Limited
    HD PENTAX-DA 40mmF2.8 Limited
    HD PENTAX-DA 21mmF3.2 AL Limited

[Others]

  • Optimized operation for new lens HD PENTAX-D FA MACRO 100mmF2.8ED AW lens.
  • Corrected --- When the mode dial is changed to [U1], [U2], [U3], [U4], or [U5], the name registered in the USER mode setting is now displayed on the rear LCD as a guide.
  • Improved stability for general performance.
  • * When this update is done, the contents of version 1.50 and earlier will be also updated.
  • * When this update is done, you will not be able to restore back to version 1.50 or earlier.
Changes to V1.50

[Enhanced features]

  • Added [KATEN] to Custom Image.
    For more details click here
  • * It can be used when attaching the following compatible lenses.
    HD PENTAX-D FA 21mmF2.4ED Limited DC WR
    HD PENTAX-DA 15mmF4ED AL Limited

[Others]

  • Improved stability for general performance.
Changes to V1.41

[Enhanced features]

  • • Added Astrotracer Type 3. For details refer to the PDF manual.Click here

[Others]

  • Improved AF accuracy and stability during viewfinder shooting.
  • Improved stability for general performance.
Changes to V1.31

[Enhanced features]

  • Added [SATOBI] to Custom Image.
  • Added Tone curve display to Custom Image.

[Others]

  • Improved stability for general performance.
Changes to V1.21
  • Improved stability for general performance.
Changes to V1.20

[Enhanced features]

  • Corresponded to IMAGE Transmitter 2 (Version2.6.0)

[Others]

  • Improved the individual AF fine-adjustment settings to identify the attachment of the HD PENTAX-DA AF REAR CONVERTER 1.4X AW.
  • Improved stability for general performance.
Changes to V1.10

[Enhanced features]

  • [Electronic shutter] can be selected.
  • When [Electronic Shutter] is selected, a high-speed shutter of fastest speed 1/16000 sec. is supported.
  • *For more details click here

[Others]

  • Optimized focus operation for new lens HD PENTAX-DA*16-50mmF2.8 ED PLM AW lens.
  • Improved stability for general performance.
Changes to V1.02
  • Improved – When using both SD card slot 1 and slot 2 at the same time, operation becomes unstable in rare cases when using some SD cards.
  • Improved stability for general performance.
Changes to V1.01
  • Improved stability of performance when battery power is low condition.
  • Corrected – In rare cases, images are not recorded correctly when shooting continuously in RAW format.
  • Improved stability for general performance.
Caution
  • Only PENTAX K-3 Mark III users are permitted to download the firmware update.
PENTAX Firmware Update Software for K-3 Mark III
Name PENTAX Firmware Update Software for PENTAX K-3 Mark III
Registered name k3III_v213.zip (zip type 31,672KB)
Applied product PENTAX K-3 Mark III
To check the version number, press the menu button and select [Firmware Info/Options] in the [Set-up 6] menu then press the four-way controller right.
Updated firmware file For Mac and windows : zip type
Release date 2024/03/14
Copy right RICOH IMAGING COMPANY, LTD.
How to check version
  1. [1] Turn ON the camera.
  2. [2] Press MENU button to display MENU screen.
  3. [3] Press the four-way controller right to display [Set-up 6] menu screen.
  4. [4] Select [Firmware Info/Options] in the [Set-up 4] menu then press the four-way controller right.

The firmware version for camera is displayed on the [Firmware Info/Options] screen.

Preparation of update
  • Blank, formatted SD/SDHC card (32MB or more)
  • Computer (with a SD card slot) or computer and SD card reader/writer.
  • Fully charged battery (D-LI90)
  • *Be sure to use fully charged battery (D-LI90)
    If the camera turns off during updating due to lack of battery power, the camera will become inoperable. If this happens, a charge will be made for repairs even if within the warranty period.

Download the updated firmware file
  • For Windows/Macintosh: k3III_v213.zip 31,672KB, zip type
Updating Procedure
  1. Provide a formatted SD memory card for the update software.
    The download file is self-extracting. The following file is extracted.
    Fwdc233b.bin: This is the updated firmware.
    Copy the above Firmware file [fwdc233b.bin] to the root directory in the SD card.
  2. Insert the D-LI90 battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
  3. Insert the update SD card (prepared in step 1) into the camera (slot 1) and close card cover.
  4. Turn the camera power on while pressing the MENU button.
  5. "Updates the camera firmware" appears in the LCD monitor.
    Ver:1.00 / 1.01 / 1.02 / 1.10 / 1.20 / 1.21 / 1.31 / 1.41 / 1.50 / 1.60 / 1.70 / 1.80 / 2.00 / 2.01 / 2.10 / 2.11 / 2.12→ 2.13 will be displayed.
  6. Press the four-way controller to select "Start" and press the "OK" button.
  7. "NOW LOADING" appears on the LCD monitor and updating starts.
    Please do not under any circumstances switch off the power before the update is completed.
  8. When update is completed, the "COMPLETE" will be displayed at the left bottom of the LCD monitor, then turn the camera off.
  9. Remove the update SD card from the camera.
    *Confirm the version of firmware with above [How to check version].
  10. [Caution]
    When updating is finished, the update SD card still contains the Firmware file.
    If you want to use this card to take pictures, format the card by the camera to delete firmware file first.

  1. This software may only be used by users who own the PENTAX K-3 Mark III
  2. This software is covered by a software license agreement. Please read the software license agreement before downloading the software.
  3. You will have agreed with this software license agreement when the download starts.
PENTAX Firmware Update Software for PENTAX K-3 Mark III Software License Agreement

The customer (hereinafter "the user") shall verify the following items below related to the use of the licensed software supplied to the user by RICOH IMAGING COMPANY, LTD. The download starts when you press "I agree. Start download." on this software license agreement.

  1. Definition of terms
    • Licensed software: "Licensed software" means the captioned program in a format that the user can download from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH IMAGING COMPANY, LTD.
    • Use : "Use" means the user downloading and retrieving the licensed software from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH IMAGING COMPANY, LTD .
    • Designated machine: "Designated machine" means the single computer system set up in order for the user to use the licensed software.
    • Reproduction: "Reproduction" means reproducing the licensed software on a storage device in the same format as the user downloaded or a different format.
    • Modification: "Modification" means performing alternations or making additions to the licensed software, or creating separate software that makes use of all or a portion of the licensed software.
  2. Grant of license
    RICOH IMAGING COMPANY, LTD grants a non-exclusive license to the user on the condition that the user uses the licensed software in accordance with the terms and conditions of this software license agreement. The user may only use the licensed software on the designated machine.
  3. Reproduction of the licensed software
    The user shall not reproduce the licensed software for purposes other than to save and backup the licensed software intended for use on the designated machine.
  4. Modifying the licensed software
    The user shall not modify or reverse engineer the licensed software for any reason.
  5. Property rights and copyright
    The copyright and other property rights for the licensed software and for reproductions of the licensed software belong to RICOH IMAGING COMPANY, LTD regardless of any reason. The user shall not remove the copyright notations from the licensed software or from reproductions of the licensed software.
  6. Grant of sublicense
    The user shall not transfer possession of the licensed software or reproductions of the licensed software to third parties, and the user shall not transfer the license nor grant a sublicense of the licensed software to third parties.
  7. Agreement period
    This software license agreement is effective on the day the user starts using the licensed software and is valid until the time the user stops use. Provided that, when the user has violated any portion of this software license agreement, RICOH IMAGING COMPANY, LTD may revoke the license granted to the user for the licensed software and terminate the software license agreement.
  8. Obligations after termination
    After the software license agreement is terminated, the user, at the user's own responsibility, shall dispose of the licensed software after rendering it into a state where it cannot be used by third parties, and dispose of reproductions and modifications of the licensed software, and all materials related to the licensed software.
  9. Guarantee of the licensed software
    RICOH IMAGING COMPANY, LTD shall not guarantee that the licensed software is suitable for the user's designated purposes, or that the licensed software is useful, or that this licensed software is free from defects, nor shall RICOH IMAGING COMPANY, LTD make any other guarantees related to the licensed software.
  10. Exporting the licensed software
    The user shall not directly or indirectly export all or a portion of the licensed software without obtaining the necessary permission from the Government of Japan or the governments of the relevant countries.
  11. RICOH IMAGING COMPANY, LTD's responsibilities
    RICOH IMAGING COMPANY, LTD A assumes no responsibility under any circumstance for direct or indirect damage or damage from ripple effects that occurs from using the licensed software, for damage to data, programs, or other intangible properties, or for loss of usage benefits and lost profits.
  12. Responsibility for employees
    The user assumes all responsibility that the user's employees (those employees that the user has a responsibility to manage or monitor based on an employment relationship) fully comprehend the obligations set forth in this software license agreement and faithfully fulfill those obligations.

For Windows/Macintosh
DownloadBack to the flont page