• Brand
  • Products
  • Store
  • Support

Windows 7

Compatibility information

Last updated: September 10, 2010

This page provides compatibility information between the Windows 7 and Ricoh digital camera products.
Please login as the administrator when you connect a camera or transfer pictuers to a computer. Otherwise, it might not work properly.

Compatibility on the USB Mass Storage Connections of Ricoh digital cameras (64 bit / 32 bit)

You can download pictures by drag and drop in mass storage connection.
Model names USB mass storage connections on Windows 7 (64 bit / 32 bit)
CX4

Supported.

  • These models work with the standard USB driver including with Windows 7.
  • Set the USB connection type to the [Mass Storage] mode in the setup menu.
G700
GXR
GR DIGITAL III
CX3 / CX2 / CX1
RICOH R10
GX200
G600
R8
R50
GR DIGITAL II
Caplio R7

Supported.
(No special setting in a camera required.)

  • These models work with the standard USB driver including with Windows 7.
Caplio GX100
Caplio R6
GR DIGITAL
Caplio 500Gwide/500SE
Caplio R5
Caplio R40/R4
Caplio R30/R3
Caplio R2
Caplio GX8
Caplio 400Gwide (*1)

Supported.

  • These models work with the standard USB driver including with Windows 7.
  • Set the USB setting to the [MASS STR] mode in the setup menu.
Caplio RR730/RR660
Caplio RR630/RR530
Caplio RR330
Caplio RR230
File transfer in the Windows 7 : Under checking

PC camera feature :
Not supported.
Caplio RR330
Caplio RR211
Not supported.
RDC-5300/5000 Not supported.
(Regarding the models on the left, there is no plan to release the Ricoh original USB driver for Windows 7.)
If you search an alternative way, please see the note below.

1)A firmware upgrade (ver. 3.00 or greater) is required. Click here to go to the download site.

Page Top

 

Compatibility on Ricoh Software (64 bit / 32 bit)

Please find your camera model in the table below. If not, please see the note below.

Picture transfer software, picture viewer software

Model names Software Compatibility on Windows 7 [32 bit] Compatibility on Windows 7 [64 bit]
G700 DL-10 List Editor ME1 Supported.
(The software CD that came with a camera is compatible)
Supported.
(The software CD that came with a camera is compatible)
CX4 DL-10 Supported.
(The software CD that came with a camera is compatible)
Supported.
(The software CD that came with a camera is compatible)
GXR
GR DIGITAL III
CX3 / CX2 / CX1
RICOH R10
DL-10 Supported (*2).
(The software CD that came with a camera is compatible)
The compatible version of the software is available on the download site.
GX200
G600
R8
Caplio R7
GR DIGITAL II
Caplio GX100
DL-10
(Ricoh Gate La)
Supported (*2).
(The software CD that came with a camera is compatible)
The compatible version of the software is available on the download site.
Caplio R6
DL-10
(Ricoh Gate La)
The compatible version of the software (*2) is available on the download site. The compatible version of the software is available on the download site.
GR DIGITAL
Ricoh Gate La The compatible version of the software (*2) is available on the download site. Not supported(*3)
Caplio 500Gwide /500SE
Caplio R5
Caplio R40/R4
Caplio R30/R3
Caplio R2
Caplio GX8/GX
Caplio R1V/R1/RZ1/RX
Caplio 400Gwide
Caplio G4/G4wide
Caplio G3/G3M/G3S
Caplio 300G/RR30
Ricoh Gate L/La
Caplio Viewer / DU-10
The compatible version of the software (*2) is available on the download site. Not supported(*3)
2) The software is for the Windows 7 x32 bit edition. x64 bit based system is not supported.
3) There is no plan to release the Windows 7 64 bit compatible software for these models. If your model supports Mass Storage mode in the camera, you can download pictures by drag and drop in the mass storage connection. Otherwise, please use a memory card reader/writer to download pictures.
 

[Note for other Ricoh camera models that are not listed above]

  • *If your Ricoh software or Ricoh camera is not listed above, or you want to find an alternative way, please see this tip for the details.
  • *We have no information on the compatiblity about the third-party software that came with your camera. Please directly ask the software company for the details. Also refer to the software FAQs.

Page Top