• Products
  • Store
  • Support

Support and Service

Downloads : Firmware Update

Thank you for using a G800SE digital camera.
RICOH Industrial Solutions Inc. wishes to announce the release of Firmware Update Software Version 1.06 for G800SE.
Firmware in this document is the software that runs inside digital cameras.

Changes to V1.06

Following problems were corrected.

  • VIP (Virtual IP address) network connection
  • Connecting to a network where the response time from a FTP server is long
  • A camera with FTPS certificate doesn't work when connecting to a network.
Changes to V1.05

Following problems were corrected.

  • Can’t send a taken image file under “New folder options”-“Date”
  • Recognition of connecting to a PictBridge printer

Supported following certificates about 802.1x authentication connection

  • Certificate whose expiration date is set to 2038 or later
  • Chained-Certificate
  • PEAP(MS-CHAP-V2): Client certificate of key length 4096-bit (about EAP-TLS, doesn’t support 4096-bit. Use a client certificate of key length 2048-bit or less)
Changes to V1.04

Following problems were corrected.

  • The auto focus/flash lamp doesn’t respond when pressing the shutter release button halfway to focus on a subject.
  • When “Create Log File” is “On”, “Restore Defaults” doesn’t work.
Changes to V1.03

Following problems were corrected.

  • When an FTP transfer folder is specified from root directory, a camera can’t send an image file.
  • In a wireless network where there are multiple access points, a camera can't connect to one of them.
  • When [Connect Power On] is “On”, each setting of [Auto Power Off] and [Monitor Auto Off Display] returns to “Off”.
Changes to V1.02

Following problems were corrected.

  • After playback of the image with camera memo of sound, the memo content isn't attached to the image.
  • When [Transmit Power Off] is 'Still' or 'Still/Movie', power doesn't turn off automatically after sending images by FTP.
  • The response of camera operation becomes slow when sending image by FTP after [Connection Power On] is 'On'.
  • During file sending by FTP, the transmission may not be canceled when pressing the DISP. Key.
  • The password lock of [Int. Memory] doesn't work depending to the setting of [Password Validity Period].
  • Improved stability for general performance.
Firmware Update Software for RICOH G800SE
Name Firmware Update Software for G800SE
Registered name g800se-106.exe (For Windows 5,007 Kbytes) ,g800se-106.zip (For Windows/Mac 4,969 Kbytes)
Applied product G800SE
Check version
Update Procedure
refer to this (English)
Sehen Sie diese (Deutsch)
Updated firmware file For Windows : LHA self-extract file, For Mac and windows : zip type
Release date 2016/06/23
Copy right RICOH Industrial Solutions Inc.
Firmware Update Software for G800SE Software License Agreement

The customer (hereinafter "the user") shall verify the following items below related to the use of the licensed software supplied to the user by RICOH Industrial Solutions INC. The download starts when you press "I agree. Start download." on this software license agreement.

  1. Definition of terms
    • Licensed software: "Licensed software" means the captioned program in a format that the user can download from the RICOH IMAGING COMPANY, LTD. website or from a site empowered by RICOH Industrial Solutions INC.
    • Use : "Use" means the user downloading and retrieving the licensed software from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH Industrial Solutions INC.
    • Designated machine: "Designated machine" means the single computer system set up in order for the user to use the licensed software.
    • Reproduction: "Reproduction" means reproducing the licensed software on a storage device in the same format as the user downloaded or a different format.
    • Modification: "Modification" means performing alternations or making additions to the licensed software, or creating separate software that makes use of all or a portion of the licensed software.
  2. Grant of license
    RICOH Industrial Solutions INC. grants a non-exclusive license to the user on the condition that the user uses the licensed software in accordance with the terms and conditions of this software license agreement. The user may only use the licensed software on the designated machine.
  3. Reproduction of the licensed software
    The user shall not reproduce the licensed software for purposes other than to save and backup the licensed software intended for use on the designated machine.
  4. Modifying the licensed software
    The user shall not modify or reverse engineer the licensed software for any reason.
  5. Property rights and copyright
    The copyright and other property rights for the licensed software and for reproductions of the licensed software belong to RICOH Industrial Solutions INC. regardless of any reason. The user shall not remove the copyright notations from the licensed software or from reproductions of the licensed software.
  6. Grant of sublicense
    The user shall not transfer possession of the licensed software or reproductions of the licensed software to third parties, and the user shall not transfer the license nor grant a sublicense of the licensed software to third parties.
  7. Agreement period
    This software license agreement is effective on the day the user starts using the licensed software and is valid until the time the user stops use. Provided that, when the user has violated any portion of this software license agreement, RICOH Industrial Solutions INC. may revoke the license granted to the user for the licensed software and terminate the software license agreement.
  8. Obligations after termination
    After the software license agreement is terminated, the user, at the user's own responsibility, shall dispose of the licensed software after rendering it into a state where it cannot be used by third parties, and dispose of reproductions and modifications of the licensed software, and all materials related to the licensed software.
  9. Guarantee of the licensed software
    RICOH Industrial Solutions INC. shall not guarantee that the licensed software is suitable for the user's designated purposes, or that the licensed software is useful, or that this licensed software is free from defects, nor shall RICOH Industrial Solutions INC. make any other guarantees related to the licensed software.
  10. Exporting the licensed software
    The user shall not directly or indirectly export all or a portion of the licensed software without obtaining the necessary permission from the Government of Japan or the governments of the relevant countries.
  11. RICOH Industrial Solutions INC.'s responsibilities
    RICOH Industrial Solutions INC. assumes no responsibility under any circumstance for direct or indirect damage or damage from ripple effects that occurs from using the licensed software, for damage to data, programs, or other intangible properties, or for loss of usage benefits and lost profits.
  12. Responsibility for employees
    The user assumes all responsibility that the user's employees (those employees that the user has a responsibility to manage or monitor based on an employment relationship) fully comprehend the obligations set forth in this software license agreement and faithfully fulfill those obligations.

For Windows
DownloadBack to the flont page

For Macintosh
DownloadBack to the flont page