CX2 FAQs - By Product
[Question] How do I fix the focal length of the zoom at 8 levels? (Step Zoom)
Step zooming allows you to set the focal length of the zoom so that it is fixed at 8 levels (28, 35, 50, 85, 105, 135, 200, 300 mm
*1).
to select [On], and then press the [ADJ./OK] button to confirm the setting.
- *1:Equivalent to that on 35 mm filmcameras
The default setting is [OFF].
The options of this mode is available in the Setup menu.
[About the Setup menu operations.]
The procedures for setting step zoom are shown below.
In the Setup menu, press the [ADJ./OK] button
to select [Step Zoom], and then press the [ADJ./OK] button
.
to select [On], and then press the [ADJ./OK] button to confirm the setting.
[Memo]| • | In Macro mode, the step zoom focal lengths are roughly equivalent to 31, 35, 50, 85, 105, 135, 200, or 300 mm on 35 mm filmcameras. |
| • | Assigning [Step Zoom] to the Fn (Function) button with [Set Fn Button] allows you to toggle the step zoom on and off by pressing the Fn button.
For the details on the Fn button registration, see the FAQ below. [How do I assign a function to the Fn (Function) button?] |
Answer ID:
EDC09245
Date created: September 4, 2009
Date modified: --
Product: CX2
Operating system: --
Category: Hardware Operations
Date created: September 4, 2009
Date modified: --
Product: CX2
Operating system: --
Category: Hardware Operations
Useful LINKs:
Do you need other information? Please click any link you want from the following.
Do you need other information? Please click any link you want from the following.
Related Links
Quick Links