• Products
  • Store
  • Support

Support and Service

Downloads : Firmware Update

Thank you for using GR II digital camera.
RICOH IMAGING COMPANY, LTD. wishes to announce the release of Firmware Update Software Version 3.00 for GR II.
Firmware in this document is the software that runs inside digital cameras.

Add the following enhanced features (V3.00)
  • Manual focus can be done by using the +/- button as well as the up-down dial.
  • [Flash Button Setting] is added. [Flash] or any one of functions which can be registered to the Fn1, Fn2, and effect buttons can also be assigned to the flash button.
  • [MF Assist Display] is added. There are two options:[On] or [Off].
  • [Level Display] is added. The design of the level indicator can be changed.
  • [Exposure Information Display]] is added. There are two options: [Always] or [Half Press].

*For more details click here   English
Traditional Chinese
Changes to V3.00
  • Improved stability for general performance.
Changes to V2.01
  • Corrected –When connecting HDMI(1080i) and set image size to XS on RAW Development, unnecessary enlarged position display on enlarge display of preview for enhanced features (V2.00)
    *Contents of [Version 2.00] and earlier version will be also updated.

Add the following enhanced features (V2.00)
  • Displaying Today's Shots
  • Setting options in shooting mode can be swiftly scrolled by pressing the +/- button.
  • [Macro AF Scan Range] is added.
  • [Conversion Lens] is added to the functions which can be registered to these buttons.
  • [Macro] is added on [Conversion Lens]
  • The values set in [Detail] can be reset to the default settings.
  • The preview image in [RAW Development] can be enlarged.

*For more details click here   English
Traditional Chinese
Changes to V2.00
  • Improved stability for general performance.
Changes to V1.10
  • Correspond to latest version of Image Sync (v1.0.5).
  • Improved stability for general performance.
Caution
  • Only GRII users are permitted to download the firmware update
Firmware Update Software for GR II
Name Firmware Update Software for GR II
Registered name rg2_v003.zip (zip type file 8,537 Kbytes)
Applied product GR II
Updated firmware file Zip type (For Windows/Macintosh)
Release date 2016/7/14
Copy right RICOH IMAGING COMPANY, LTD.
How to check version
  1. [1] Turn ON the camera.
  2. [2] Press MENU/OK button and press Fn1 button.
  3. [3] Press WB button to display [Set-up ] menu screen.
  4. [4] Press flash button and Select [Confirm Firmware Version].
  5. [5] Press flash button.

The firmware version for camera is displayed on the [Confirm Firm Version] screen.

Preparation of update
  • Blank, formatted SD card (16MB or more)
  • USB cable
    If you are copying the firmware update file to the SD card by connecting the camera directly to your computer.
  • SD card reader or a computer with a SD card slot.
    If you are copying the firmware update file to the SD card using a memory card reader / writer.
  • Fully charged battery
  • *Be sure to use fully charged battery
    If the camera turns off during updating due to lack of battery power, the camera will become inoperable. If this happens, a charge will be made for repairs even if within the warranty period.

Download the updated firmware file
  • For Windows/Macintosh :rg2_v003.zip 8,537 Kbytes, zip type
Updating Procedure
  1. [1] ] Provide a formatted SD memory card for the update software.
    The download file is self-extracting. The following file is extracted.
    • rg2_v003.frm: This is the updated firmware
      Copy the above Firmware file [rg2_v003.frm] to the root directory in the SD card.
      If your computer does not have a card slot, you can copy the firmware update file by inserting the SD card into your camera and then connecting the camera directly to your computer.
  2. [2] Insert the battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
  3. [3] Insert the update SD card (prepared in step 1) into the camera and close card cover.
  4. [4] Turn the camera power on.
  5. [5] Press MENU button and press Fn1 button.
  6. [6] Press WB button to display [Set-up] menu screen.
  7. [7] Press flash button and Select [Confirm Firmware Version].
  8. [8] Press flash button
    Current version and new version will be displayed.
    *If firmware file is not saved to SD card correctly, this screen will not be displayed.
  9. [9] Select [Yes] and press MENU/OK button.
    •   *The firmware update will start.
    •   *Do not turn OFF the camera while updating.
  10. [10] When update is completed, “Firmware update complete” will be displayed
  11. [11] Press MENU/OK button then remove the SD card from camera.
    *Confirm the version of firmware with above [How to check version].
  12. [Caution]
    When updating is finished, the update SD card still contains the Firmware file.
    If you want to use this card to take pictures, format the card by the camera to delete firmware file first.
  1. This software may only be used by users who own the GR II
  2. This software is covered by a software license agreement. Please read the software license agreement before downloading the software.
  3. You will have agreed with this software license agreement when the download starts.
Firmware Update Software for GR II Software License Agreement

The customer (hereinafter "the user") shall verify the following items below related to the use of the licensed software supplied to the user by RICOH IMAGING COMPANY, LTD. The download starts when you press "I agree. Start download." on this software license agreement.

  1. Definition of terms
    • Licensed software: "Licensed software" means the captioned program in a format that the user can download from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH IMAGING COMPANY, LTD.
    • Use : "Use" means the user downloading and retrieving the licensed software from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH IMAGING COMPANY, LTD .
    • Designated machine: "Designated machine" means the single computer system set up in order for the user to use the licensed software.
    • Reproduction: "Reproduction" means reproducing the licensed software on a storage device in the same format as the user downloaded or a different format.
    • Modification: "Modification" means performing alternations or making additions to the licensed software, or creating separate software that makes use of all or a portion of the licensed software.
  2. Grant of license
    RICOH IMAGING COMPANY, LTD grants a non-exclusive license to the user on the condition that the user uses the licensed software in accordance with the terms and conditions of this software license agreement. The user may only use the licensed software on the designated machine.
  3. Reproduction of the licensed software
    The user shall not reproduce the licensed software for purposes other than to save and backup the licensed software intended for use on the designated machine.
  4. Modifying the licensed software
    The user shall not modify or reverse engineer the licensed software for any reason.
  5. Property rights and copyright
    The copyright and other property rights for the licensed software and for reproductions of the licensed software belong to RICOH IMAGING COMPANY, LTD regardless of any reason. The user shall not remove the copyright notations from the licensed software or from reproductions of the licensed software.
  6. Grant of sublicense
    The user shall not transfer possession of the licensed software or reproductions of the licensed software to third parties, and the user shall not transfer the license nor grant a sublicense of the licensed software to third parties.
  7. Agreement period
    This software license agreement is effective on the day the user starts using the licensed software and is valid until the time the user stops use. Provided that, when the user has violated any portion of this software license agreement, RICOH IMAGING COMPANY, LTD may revoke the license granted to the user for the licensed software and terminate the software license agreement.
  8. Obligations after termination
    After the software license agreement is terminated, the user, at the user's own responsibility, shall dispose of the licensed software after rendering it into a state where it cannot be used by third parties, and dispose of reproductions and modifications of the licensed software, and all materials related to the licensed software.
  9. Guarantee of the licensed software
    RICOH IMAGING COMPANY, LTD shall not guarantee that the licensed software is suitable for the user's designated purposes, or that the licensed software is useful, or that this licensed software is free from defects, nor shall RICOH IMAGING COMPANY, LTD make any other guarantees related to the licensed software.
  10. Exporting the licensed software
    The user shall not directly or indirectly export all or a portion of the licensed software without obtaining the necessary permission from the Government of Japan or the governments of the relevant countries.
  11. RICOH IMAGING COMPANY, LTD 's responsibilities
    RICOH IMAGING COMPANY, LTD A assumes no responsibility under any circumstance for direct or indirect damage or damage from ripple effects that occurs from using the licensed software, for damage to data, programs, or other intangible properties, or for loss of usage benefits and lost profits.
  12. Responsibility for employees
    The user assumes all responsibility that the user's employees (those employees that the user has a responsibility to manage or monitor based on an employment relationship) fully comprehend the obligations set forth in this software license agreement and faithfully fulfill those obligations.

For Windows/Macintosh
DownloadBack to the flont page