CX1 FAQs - By Product / Support / Digital Camera　| Ricoh Global

[Question] Let me know about the MF (Manual Focus).

If the camera fails to focus automatically, you can focus manually (MF: Manual Focus). Manual focus enables shooting at a fixed distance.

The procedures for focusing manually are shown below.

1

Turn the mode dial to a shooting mode.

2

Press the [MENU] button to display the shooting menu.

3

Press the [ADJ./OK] button

to select [Focus], and then press the button to

.

4

Press the [ADJ./OK] button

to select [MF].

5

Press the [ADJ./OK] button.
The display returns to the shooting screen, and the [MF] symbol and the focus bar appear on the picture display.<

*The above shows the example of the picture display when the shooting information display frame has been set to [On].
What is the Shooting info. Display Frame ?

6

Press and hold the [ADJ./OK] button as required.

•	Pressing and holding the [ADJ./OK] button increases the magnification only at the center of the screen.
•	Pressing and holding the [ADJ./OK] button again returns from enlarged view to normal view.

7

Adjust the zoom position with the zoom lever as required.

The zoom bar is only displayed only when operating the zoom lever.

8

Press the [ADJ./OK] button

to adjust the focus.

•	Pressing the [ADJ./OK] button adjusts the focus to farther objects.
•	Pressing the [ADJ./OK] button adjusts the focus to closer objects.

9

Press the shutter release button to shoot the picture.

•	In Scene mode, manual focus can be used when [Zoom Macro] or [Skew Correct Mode] is selected.
•	You can also use manual focus to focus on objects within the macro shooting range without using the macro mode.

Page Top

Answer ID: EDC09025
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations

Useful LINKs:

Do you need other information? Please click any link you want from the following.