• Brand
  • Products
  • Store
  • Support

CX3 FAQs - By Product


[Question] About the Date and time setting operations.


At the first time when you turn on a camera, you will be asked to set the date and time setting in the camera.
Or you may want to change the date and time setting to the local date and time, if you go to another country with time differences.

The date and time option is located the [Date Settings] in the Setup menu. See the FAQ below for the Setup menu operations.

The operations below show the procedure in the Setup menu.

1 Choose [Date Settings] in the Setup menu, and then press Right .
   Choose [Date Settings].
2 The [Date Settings] will appear on the screen.
Date Settings screen
  • * Using the [ADJ./OK] button Up or down allows to change the setting. The [ADJ./OK] button Right or left allows to change the item.
The 3 options of the date format are available. Use the [ADJ./OK] button Up or down for the format changes.

Date format changes

Y/M/D/ hh:mm example; [2009/09/30 12:30]
M D Y hh:mm example; [SEP 30 2009 12:30]
D M Y hh:mm example; [30 SEP 2009 12:30]

3 After completed the settings, check to see the selections, and press the [ADJ./OK] button. The confirmation screen will be displayed.
Confirmation screen
4 Press the [ADJ./OK] button again. The setting is fixed and it returns to the Setup menu. Press the [MENU] button or [ADJ./OK] button to exit the Setup menu.

[Note]
• If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.
• In order to retain the date and time settings, load a battery with adequate remaining power for more than two hours.
• For the Date imprinting, see the FAQ below.

Page Top

 
Answer ID: EDC03085
Date created: April 12, 2010
Date modified: --
Product: CX3
Operating system: --
Category: Hardware operations

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top