• Brand
  • Products
  • Store
  • Support

CX3 FAQs - By Product

[Question] How do I adjust the light intensity of the flash (Flash exposure compensation)?

You can set the light intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.

The procedures for this setting are shown below.

  • 1Turn the mode dial to a shooting mode.

    Turn the mode dial to a shooting mode.

  • 2Press the [MENU] button to display the shooting menu.

    Press the [MENU] button to display the shooting menu.

  • 3Press the [ADJ./OK] buttonDown to select [Flash Exposure Compensation], and press the button Right (Flash).

    Press the [ADJ./OK] button down to select [Flash Exposure Compensation], and press the button to the right.
    Press the [ADJ./OK] button down to select [Flash Exposure Compensation], and press the button to the right.

  • 4The flash exposure compensation bar appears.
    The flash exposure compensation bar appears.
    Press the [ADJ./OK] buttonUp Down to make the setting.
  • 5Press the [ADJ./OK] button.
    The setting appears on the screen, except when the flash mode has been set to [Flash Off].

    The setting appears on the screen, except when the flash mode has been set to [Flash Off].

[Caution]
Flash exposure compensation may not work outside the flash range.
See About the flash. for more information about the flash range.

[Note]
For flash operations, see About the flash.

Page Top

 
Answer ID: EDC03039
Date created: March 12, 2010
Date modified: April 14, 2010
Product: CX3
Operating system: --
Category: Hardware operations



Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top