CX2 FAQs - By Product

[Question] How do I assign functions to the [ADJ./OK] button?

When functions are assigned to the [ADJ./OK] button, you can display various shooting setting screens with fewer button operations and without displaying the shooting menu. You can use [ADJ Button Setting 1] to [ADJ Button Setting 4] to assign camera functions that can be activated by pressing the [ADJ./OK] button.

• *The Density is only available in the Text mode in the SCENE mode and which has been registered as default.

The procedures for assigning functions to [ADJ Button Setting 1] to [ADJ Button Setting 4] are shown below.

1	With camera power on, press the [MENU] button.
2	Press the [ADJ./OK] button , and then press to display the setup menu.
3	Press the [ADJ./OK] button , and then press to select [ADJ Button Setting 1] - [ADJ Button Setting 4]. Press the [ADJ./OK] button .
4	Press the [ADJ./OK] button to select the desired setting, and then press the [ADJ./OK] button.
	If you press the [ADJ./OK] button in a shooting mode, the functions that have been set in ADJ. mode are displayed. *The above shows the example of the picture display when the shooting information display frame has been set to [On]. [What is the Shooting Info. Display Frame?]

Press the [ADJ./OK] button to select the item that you want to set.

The items that can be set for each shooting mode are shown below.

• *The items for Scene mode (except for Discreet mode), Easy shooting mode, and Movie mode are fixed and cannot be changed.

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting of camera operations
• Troubleshooting of USB connections
• FAQs Top
• Support Top