CX2 FAQs - By Product

[Question] How do I set the LCD image confirmation time?

Immediately after you press the shutter release button, the still image that you have taken remains displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 0.5 seconds, but this can be changed.

1. 1Press the [MENU] button. The shooting menu or playback menu appears.

   

2. 2Press the [ADJ./OK] button , and then press . The setup menu appears.

   

   

3. 3Press the [ADJ./OK] button , press to select [LCD Confirmation Time], and then press the button .

   

4. 4Press the [ADJ./OK] button to select the desired setting, and then press the [ADJ./OK] button.
   If you set [LCD Confirmation Time] to [Hold], you can also enlarge or delete the displayed image.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting of camera operations
• Troubleshooting of USB connections
• FAQs Top
• Support Top