• Brand
  • Products
  • Store
  • Support

CX1 FAQs - By Product

[Question] What is LCD auto dimmer mode?

When [LCD Auto Dim] is set to [On], the picture display dims to conserve battery power if the camera is not moved for approximately five seconds. Move the camera or press any button to return to the original picture display brightness.

The default setting is [On].
The procedures for changing LCD auto dimmer mode settings are shown below.

  • 1Press the [MENU] button. The shooting menu or playback menu appears.
  • Press the [MENU] button. The shooting menu or playback menu appears.

  • 2Press the [ADJ./OK] button Left, and then press Down. The setup menu appears.
  • Press the [ADJ./OK] button to the left, and then press it down. The setup menu appears.
  • If the camera is in Scene mode or Continuous mode, press the [ADJ./OK] button Left to select the [MODE] tab.
  • If the camera is in Scene mode or Continuous mode, press the [ADJ./OK] button to the leftto select the [MODE] tab.
  • After that, press the [ADJ./OK] button down twice to display the setup menu.
  • After that, press the [ADJ./OK] button down twice to display the setup menu.

  • 3Press the [ADJ./OK] button Right, press Up Down to select [LCD Auto Dim], and then press it to the right.

  • 4Press the [ADJ./OK] button Up Down to select [On], and then press the [ADJ./OK] button.
  • Press the [ADJ./OK] button up and down to select [On], and then press the [ADJ./OK] button.

[Note]
The [LCD Auto Dim] setting is disabled in Synchro monitor mode.

Page Top

 
Answer ID: EDC09043
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations


Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top