• Brand
  • Products
  • Store
  • Support

CX1 FAQs - By Product

[Question] How do I adjust the light intensity of the flash (Flash exposure compensation)?

You can set the light intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.

The procedures for this setting are shown below.

1 Turn the mode dial to a shooting mode.
Turn the mode dial to a shooting mode.

2 Press the [MENU] button to display the shooting menu.
Press the [MENU] button to display the shooting menu.

3 Press the [ADJ./OK] button Down to select [Flash Exposure Compensation], and press the button Right.
Press the [ADJ./OK] button down to select [Flash Exposure Compensation], and press the button to the right.
Press the [ADJ./OK] button down to select [Flash Exposure Compensation], and press the button to the right.

4 The flash exposure compensation bar appears.
The flash exposure compensation bar appears.
Press the [ADJ./OK] button Up Down to make the setting.
5 Press the [ADJ./OK] button.
The setting appears on the screen, except when the flash mode has been set to [Flash Off].
The setting appears on the screen, except when the flash mode has been set to [Flash Off].

[Caution]

Flash exposure compensation may not work outside the flash range.
See Let me know about the flash. for more information about the flash range.

[Note]

For information on how to use the flash, see Let me konow about the flash.

Page Top

 

Answer ID: EDC09039
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations


Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top