CX1 FAQs - By Product / Support / Digital Camera　| Ricoh Global

[Question] How do I assign functions to the [ADJ./OK] button?

When functions are assigned to the [ADJ./OK] button, you can display various shooting setting screens with fewer button operations and without displaying the shooting menu. You can use [ADJ Button Setting 1] to [ADJ Button Setting 4] to assign camera functions that can be activated by pressing the [ADJ./OK] button.

[Note]
The following functions can be assigned to the [ADJ./OK] button.

Off
Exposure Comp (*Default setting for [ADJ Button Setting 1])
White Balance (*Default setting for [ADJ Button Setting 2])
ISO (*Default setting for [ADJ Button Setting 3])
Quality (*Default setting for [ADJ Button Setting 4])
Focus
Image
Expo. Metering
Auto Bracket
Flash Comp.
Min. Aperture
Density

The procedures for assigning functions to [ADJ Button Setting 1] to [ADJ Button Setting 4] are shown below.

1	With camera power on, press the [MENU] button.


2	Press the [ADJ./OK] button , and then press to display the setup menu.


3	Press the [ADJ./OK] button , and then press to select [ADJ Button Setting 1] - [ADJ Button Setting 4]. Press the [ADJ./OK] button .


4	Press the [ADJ./OK] button to select the desired setting, and then press the [ADJ./OK] button.
	If you press the [ADJ./OK] button in a shooting mode, the functions that have been set in ADJ. mode are displayed. *The above shows the example of the picture display when the shooting information display frame has been set to [On]. [What is the Shooting Info. Display Frame?]

Press the [ADJ./OK] button

to select the item that you want to set.

The items that can be set for each shooting mode are shown below.

*The items for Scene mode, Easy shooting mode, and Movie mode are fixed and cannot be changed.

Page Top

Answer ID: EDC09027
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations

Useful LINKs:

Do you need other information? Please click any link you want from the following.