• Brand
  • Products
  • Store
  • Support

CX1 FAQs - By Product


[Question] How do I set the LCD image confirmation time?


Immediately after you press the shutter release button, the still image that you have taken remains displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 0.5 seconds, but this can be changed.


Off (The image is not displayed for confirmation.)
0.5 seconds *Default setting
1 second
2 seconds
3 second
Hold (The image remains displayed until the next time you half-press the shutter release button.)


1  Press the [MENU] button. The shooting menu or playback menu appears.
Press the [MENU] button. The shooting menu or playback menu appears.
   
2  Press the [ADJ./OK] button Left, and then press Down. The setup menu appears.
Press the [ADJ./OK] button to the left, and then press it down. The setup menu appears.
Press the [ADJ./OK] button to the left, and then press it down. The setup menu appears.
   
3  
 Press the [ADJ./OK] button Right, press Up Down to select [LCD Confirmation Time], and then press the button Right.
Press the [ADJ./OK] button to the right, press up and down to select [LCD Confirmation Time], and then press the button to the right.
   
4  
 Press the [ADJ./OK] button Up Down to select the desired setting, and then press the [ADJ./OK] button.
If you set [LCD Confirmation Time] to [Hold], you can also enlarge or delete the displayed image.

Page Top

 
Answer ID: EDC09019
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations


Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top