|
Please check the version of the camera's current firmware before beginning this update.
|
|
1. |
Turn the mode selector to Playback Mode. |
|
2. |
While pressing both the down arrow button and the telephoto button, turn the power on. |
|
3. |
A table like the one below will be displayed on the monitor. If "V 1.00" (or a lower number) is displayed in the CPU2 field, you will need to update your camera's firmware to the most recent version. |
|
|
CPU1: V X.XX
CPU2: V 1.00
MON: V X.XX
ADJ: V X.XX
SH: XXXXXX
ST: XXXXXX |
|
|
|
Note: This screen will be displayed for about 20 seconds. You will not be able to turn the power off or use any of the other functions during this time. Please wait until this display finishes, at which point the SETUP screen will be displayed. |