|
Please check the version of the camera's current firmware before beginning this update.
|
|
1. |
Turn the mode dial to SETUP. |
|
2. |
While pressing both the down arrow button and the telephoto button, turn the power on. |
|
3. |
A table like the one below will be displayed on the monitor. If "V 1.00" (or a lower number) is displayed in the CPU2 field, you will need to update your camera's firmware to the most recent version. |
|
|
CPU1: V X.XX
CPU2: V 1.00
MON: V X.XX
ADJ: V X.XX
SH: XXXXXX
ST: XXXXXX |
|
|
|
Note: This screen will be displayed for about 20 seconds. Please wait until this display finishes, at which point the SETUP screen will be displayed. |