Thank you for using RICOH G900SE digital camera.
RICOH IMAGING COMPANY, LTD. wishes to announce the release of Firmware Update Software Version 1.01 for RICOH G900SE.
Firmware in this document is the software that runs inside digital cameras.
|Name||Firmware Update Software for RICOH G900SE|
|Registered name||g900se_v101.zip (zip type file 32,174 Kbytes)|
|Applied product||RICOH G900SE|
|Updated firmware filev||Zip type (For Windows/Mac)|
|Copy right||RICOH IMAGING COMPANY, LTD.|
 Turn ON the camera.
 Press MENU button.
 Operate 4-way button and display 4/5 page of the [Setup menus]
 Operate 4-way button and select [Version Info] then press 4-way button right.
 The firmware version for camera is displayed on the [Version Info] screen.
 Provide a formatted SD memory card for the update software.
The download file is compressed file, so that it needs to be extracted. The following file is extracted file.
 Insert the battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
 Insert the update SD card (prepared in step 1) into the camera and close card cover.
 Press + buttons at same time.
 [Update the camera firmware] is displayed
Select [Execute] by 4-way button and press [OK] button.
 The firmware update will start and [Updating] is displayed.
*Do not turn OFF the camera while updating.
 When update is completed, [Update completed] will be displayed
 Turn OFF the camera and remove the SD card from camera.
*Confirm the version of firmware with above [How to check version].
The customer (hereinafter "the user") shall verify the following items below related to the use of the licensed software supplied to the user by RICOH IMAGING COMPANY, LTD. The download starts when you press "I agree. Start download." on this software license agreement.