• Products
  • Store
  • Support

Support and Service

Downloads: Update Software

DC Software Update for Windows

Thank you for using G800SE.
RICOH Industrial Solutions INC. wishes to announce the release of the Windows Updater for update the DC Software.


Name DC Software
Registered name dc_software_g800se.zip (5,784 Kbytes)
System requirement OS : Windows Vista Service Pack 2/ 32- and 64-bit editions of Windows 7 Service Pack 1/ 32- and 64-bit editions of Windows 8.1,
32- and 64-bit editions of Windows 10, Windows Server 2008 R2 Service Pack 1, Windows Server 2012 R2
CPU: Pentium® IV: 1.6 GHz or faster / Pentium® M: 1.4 GHz or faster / Core™ 2 Duo: 1.5 GHz or faster
RAM: 1GB or more
Free Disk Space: A minimum of 300 MB required for installation
Display Resolution: 1024 × 768 pixels or greater
Display Colors: 65,000 colors or greater
Software contents ・DL-10 (Ver. 4.6.0.3) - sends files to PC with USB connected
・SR-10 (Ver. 1.2.0.12) - ftp server for G800SE, G700SE
・ST-10 (Ver. 1.2.0.14) - wireless LAN settings for 800SE, G700SE
・List Editor (Ver. 2.4.0.0) - create camera memos
・ME1 (Ver. 1.0.1.0) - view and manage files with camera memos
All are not supported multisession.
Release date 2016/08/25
Copy right RICOH Industrial Solutions Inc.
How to Update
  1. Download [dc_software_g800se.zip] in your computer and decompress it.
  2. Find the [Setup.exe] in the [Disk 1] folder, and double click to run the setup, and then follow the instructions.
  3. After rebooting a PC, if the Windows security alert may appear, check the program name on the message. About the [DL-10] from Ricoh, click the [Unblock] button.
  4. If DC software has installed in PC, Setup.exe deletes it once. After this, please run Setup.exe again.

Update history
[25, August 2016] SR-10 (Ver. 1.2.0.12)

modified the following

  • Tmp file is remained in a received folder of SR-10 after the below message appears when using SR-10 with EX1:
    "Untiled file was not found." or "Sharing violation occurred while accessing untitled file."
    Also update EX1 software when updating SR-10.
[17, September 2015] DL-10 (Ver. 4.6.03), SR-10 (Ver. 1.2.0.11), ST-10 (Ver. 1.2.0.14)
  • Display Spanish in Spanish's OS
  • 'Data taken' matches 'Modified' of OS properties after copying an image file by using DL-10. (camera of which USB connection is "Original", Caplio500G etc)
[12, March 2015] SR-10 (Ver. 1.2.0.10)
  • When using FTPS Implicit mode, it enables to set any port number.
[8, January 2015] SR-10 (Ver. 1.2.0.9)

modified the following

  • After specifying places of 'Secret Key File' and 'Server Certificate File' at [FTPS] tab, these places are unable to be blanked.
  • After operation of registration or deregistration at 'Register File' tab, the specified secret key file and server certificate file at 'FTPS' tab are deleted.
[8, January 2015] ST-10 (Ver. 1.2.0.13)

modified the following

  • The software screen layout is changed from portrait to landscape
  • Unable to register network key in blank
  • Unable to enter 'Certificate Path' (except Japanese OS)
DC software Updater License Agreement

The customer (hereinafter "the user") shall verify the following items below related to the use of the licensed software supplied to the user by RICOH Industrial Solutions INC. The download starts when you press "I agree. Start download." on this software license agreement.

  1. Definition of terms
    • Licensed software: "Licensed software" means the captioned program in a format that the user can download from the RICOH IMAGING COMPANY, LTD. website or from a site empowered by RICOH Industrial Solutions INC.
    • Use : "Use" means the user downloading and retrieving the licensed software from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH Industrial Solutions INC.
    • Designated machine: "Designated machine" means the single computer system set up in order for the user to use the licensed software.
    • Reproduction: "Reproduction" means reproducing the licensed software on a storage device in the same format as the user downloaded or a different format.
    • Modification: "Modification" means performing alternations or making additions to the licensed software, or creating separate software that makes use of all or a portion of the licensed software.
  2. Grant of license
    RICOH Industrial Solutions INC. grants a non-exclusive license to the user on the condition that the user uses the licensed software in accordance with the terms and conditions of this software license agreement. The user may only use the licensed software on the designated machine.
  3. Reproduction of the licensed software
    The user shall not reproduce the licensed software for purposes other than to save and backup the licensed software intended for use on the designated machine.
  4. Modifying the licensed software
    The user shall not modify or reverse engineer the licensed software for any reason.
  5. Property rights and copyright
    The copyright and other property rights for the licensed software and for reproductions of the licensed software belong to RICOH Industrial Solutions INC. regardless of any reason. The user shall not remove the copyright notations from the licensed software or from reproductions of the licensed software.
  6. Grant of sublicense
    The user shall not transfer possession of the licensed software or reproductions of the licensed software to third parties, and the user shall not transfer the license nor grant a sublicense of the licensed software to third parties.
  7. Agreement period
    This software license agreement is effective on the day the user starts using the licensed software and is valid until the time the user stops use. Provided that, when the user has violated any portion of this software license agreement, RICOH Industrial Solutions INC. may revoke the license granted to the user for the licensed software and terminate the software license agreement.
  8. Obligations after termination
    After the software license agreement is terminated, the user, at the user's own responsibility, shall dispose of the licensed software after rendering it into a state where it cannot be used by third parties, and dispose of reproductions and modifications of the licensed software, and all materials related to the licensed software.
  9. Guarantee of the licensed software
    RICOH Industrial Solutions INC. shall not guarantee that the licensed software is suitable for the user's designated purposes, or that the licensed software is useful, or that this licensed software is free from defects, nor shall RICOH Industrial Solutions INC. make any other guarantees related to the licensed software.
  10. Exporting the licensed software
    The user shall not directly or indirectly export all or a portion of the licensed software without obtaining the necessary permission from the Government of Japan or the governments of the relevant countries.
  11. RICOH Industrial Solutions INC.'s responsibilities
    RICOH Industrial Solutions INC. assumes no responsibility under any circumstance for direct or indirect damage or damage from ripple effects that occurs from using the licensed software, for damage to data, programs, or other intangible properties, or for loss of usage benefits and lost profits.
  12. Responsibility for employees
    The user assumes all responsibility that the user's employees (those employees that the user has a responsibility to manage or monitor based on an employment relationship) fully comprehend the obligations set forth in this software license agreement and faithfully fulfill those obligations.

DownloadBack to the flont page