RICOH PX FAQs - By Product / Support / Digital Camera　| Ricoh Global

In order to configure respective camera setting options, go to the Setup menu.

1 Press the MENU/OK button in a shooting mode.
The Shooting menu or the Setup menu will be displayed.
If [Quick shooting menu] or [Quick playback menu] is displayed, choose the [Adv. shooting options] or [Adv. PB options] with buttons, and press the MENU/OK button.
2 The [Shooting] menu or [Playback] menu will be displayed.
3 Press button to move the tab area, and press down to choose the Setup tab (the red marked symbol in the figure below).
4 Use the [PREMIUM] button or the [Exposure] button to choose a setting option. To show the options, use button.

PREMIUM button
Exposure button
Example : selected [Quick menu display]
5 Use [PREMIUM] button or the [Exposure] button to choose an option and press the MENU/OK button.
The selected option is fixed and the screen returns to the shooting screen, or the playback screen.
If button is pressed instead of the MENU/OK button, it will return to the screen in the step 3. If you want to change the other option, follow the step 4 through 5.

[Information]

Option selection may differ from above steps depending on the feature.

The items that can be set for each Setup menu option are shown below.

Setting items	Options [Default]
Quick menu display *1	[On], Off
Choose shooting info.	[Show info] Grid Guide Hide info
Grid Guide Display	[ ] (3x3), (4x4 with diagonal lines), (2x2 but no line in the center area)
Playback info	[Simplified], Detailed, Off
Auto Rotate	[On], Off
Auto-protect faves *2	On, [Off]
LCD Brightness	--
AF Auxiliary Light	[On], Off
Operation Sounds	[All], Shutter Sounds
Volume Settings	(Mute), (Small), [ ] (Medium), (Large)
LCD Confirmation Time	Off, [0.5 seconds], 1 second, 2 seconds, 3 seconds, Hold
Auto Power Off	Off, 1 minute, [5 minutes], 30 minutes
Sleep Mode	[Off], 10 seconds, 1 minute, 3 minutes
LCD Auto Dim	[On], Off
Digital Zoom Image	[Normal], Auto Resize
Card Sequence No.	On, [Off]
Date Settings	--
Language /	( Available options and the default setting varies depending on where you purchased the camera.)
Video Out Mode	NTSC, PAL * The default settings depending on where you purchased the camera.
HDMI Output *3	[AUTO], 1080i, 720P, 480P
Format [Card] *4	--
Format [Internal Memory]	--
Confirm Firmware Ver.	-- * This menu shows the current firmware version. If you set the SD card that is stored the firmware update files for this model, you can update the firmware from this menu.
Eye-Fi Settings	[On], Off * This menu only appears when an Eye-Fi card is set in the camera. [On] is to enable the wirelss-LAN feature of the card.
Eye-Fi Host ID	-- * This menu only appears when an Eye-Fi card is set in the camera. Show the destination SSID.

*1) If [Off] is selected, the Quick menu will not be displayed and the full shooting or playback menu will be displayed.
About Quick Shooting menu / Quick Playback menu.
*2) If [On] is selected, the rated pictures (with favorites ) are protected automatically and they will not be deleted.
About rating pictures (favorites).
*3) You can choose the resolution for video output using the optional HDMI cable. For normal use, choose the [Auto] option. If the video resolution actually shown on the TV is low with the [Auto] option, choose [1080i] or [720P] to achieve the better possible quality.
*4) When using Eye-Fi cards, install the software in the Eye-Fi card to your computer and then format the card.