• Brand
  • Products
  • Store
  • Support

RICOH LENS A16 24-85 mm : How to attach the camera unit to the GXR body.

Be sure the power is off before attaching or removing the camera unit to / from the camera body.
* Below are example of GXR body and A12 50mm unit.

  • 1 Remove the terminal caps (the red marked in the figure below) from the GXR body and the camera unit.
  • Remove a teminal cap
  • 2 Align the left side of the camera unit with the alignment mark (red marked in the figure below) on the camera body, and then slide the camera unit to the left unit until it clicks.
  • Attaching the camera unit to the body
  • 3 In order to remove the camera unit, slide the camera unit release lever (red marked in the figure below) to the right, and remove the camera unit.
  • Removing the camera unit

Attention [Note]
Be careful not to drop the camera unit or the GXR body when attaching or removing them.

 
Answer ID: gxr00080
Date created: February 3, 2012
Date modified: --
Product: GXR (RICOH LENS A16 24-85mm F3.5-F5.5)
Operating system: --
Category: Hardware specifications
Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top