GR DIGITAL IV : Can I adjust the tone of the captured image in a camera ? (White balance compensation)

You can correct the green (G), magenta (M), blue (B) or amber (A) color tones of still images after you have shot them, and then record the corrected images.

[Caution]

• • White Balance Compensation is available only for captured images with this camera.
• • White Balance Compensation is not available for movies, still images with S-Cont or M-Cont modes.
• • This function may not have any effect for images shot when [Image Settings] is set to [Black & White], [B&W (TE)], or [Hi-Cntrast B&W].
• • You can use white balance compensation repeatedly, but this will result in a decline in image quality due to the fact that the image is recompressed each time.

To use this feature, display the still image that you want to correct, and then go to [White Balance Compensation] in the Playback menu.

1. Select [White Balance Compensation] in the Playback menu, and press .

2. The [White Balance Compensation] screen appears.

The original image appears at the upper left of the screen, the white balance compensation map is at the lower left, and the corrected image is shown on the right.

3. Press to move the pointer (circled in white in the below) in the white balance compensation map.

• • To reset white balance compensation to a neutral value, press the [DISP.] button.
• • To exit this feature without creating a copy, press the [DISP.] button again (or press the button twice).
• • Pressing the [Fn2] button at this point displays the Help screen. Pressing the [Fn2] button again returns the display to the previous screen.

4. When the adjustment is finished, press the [MENU/OK] button. The corrected image is recorded. The original image is remains unchanged.

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting / Failure diagnosis
• FAQs Top
• Support Top