GXR FAQs - By Product

[Question] Can I export a specific frame from an MP file into a still image?

You can extract specific frames from an MP file shot using M-Cont Plus and save each frame as an individual still image.

• •The individual images in an MP file cannot be deleted separately.
• •The original files will be retained after exportation.

Use the following method to export MP files.

• 1Press the playback button and go to the Playback mode.

  

• 2Use [Fn1], [Fn2], [+] or [-] buttons (Directional pad) to display the MP file you want to export.
  The symbol with red frames in the figure below is for MP files.
  
  

  

• 3Press the [MENU/OK] button. The playback menu appears.

  

  Press [+] [-] buttons to select [Export Still Images]. In order to move to the next page in the menu, press [-] button down at the last bottom item, or just press [-] button while pressing and holding the [DIRECT] button.

  
  

• 4Press the [Fn2] button.
  Choose an option from [1 Frame] [Sel Mult] or [All Frames] using [+] [-] buttons.

  

  * Selected [1 Frame] option example

• 5[Selecting 1 Frame]
  Press [+] [-] buttons to choose [1 Frame] option, press the [MENU/OK] button. Display the frame for exporting using [Fn1] [Fn2] buttons, and then press the [MENU/OK] button.
  
  [Selecting multi frames]
  Press [+] [-] buttons to choose [Sel Multi] option, press the [MENU/OK] button. Choose [Sel. Indiv.] or [Sel. Range] using [Fn1] [Fn2] buttons, and then press the [MENU/OK] button.
  
  

  

  • •If you have selected [Sel. Indiv.]
    Press the [+] [-] [Fn1] [Fn2] buttons (Directional pad) to select the frames that you want to save as still images, and press the [MENU/OK] button to select each frame at a time.
    If you make a mistake when selecting a frame, you can cancel it by pressing the [MENU/OK] button again.
    Use this procedure to specify all frames that you want to turn into still images. A symbol appears on each selected image. (See the symbols with red borders below)

    
    

    After selections, press button, and choose [Yes] with the [Fn2] button, and then press the [MENU/OK] button.
  • •If you have selected [Sel. Range]
    Press the [+] [-] [Fn1], or [Fn2] buttons to select the starting point for the range of frames you want to specify, and press the [MENU/OK] button. If you make a mistake when selecting, pressing the DISP. button will return to the starting frame selection screen, or pressing the ADJ. button will switch to the selection individually.
    

    

    The starting frame will be displayed with white borders.
    After selecting the starting frame, move to the end point for the range of frames you want to specify. Press the MENU/OK button again. If you make a mistake of selection, press the DISP. button to cancel it.
    After the range selections, pressbutton, and press [Fn2] button to select YES, then press the MENU/OK button.
    
    
• [Selecting all frames]
  Press the [+] [-] [Fn1], or [Fn2] buttons to select [All Frames] and press the [MENU/OK] button, and press [Fn2] button to select YES, and then press the MENU/OK button.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting / Failure diagnosis
• FAQs Top
• Support Top