GXR FAQs - By Product

[Question] About the Flag function setting.

You can assign image files to [Flag Function Setting]. Assigned images can be recalled at a later time from [Flag Function Display] in the Playback menu.

Up to 20 images can be assigned to [Flag Function Settings].

The procedures for assigning files to [Flag Function Setting] and canceling their settings are shown below.

1	Press the playback button to go to the playback mode.

2	Press [Fn1] [Fn2] [+] [-] buttons (Directional pad) to display the file you want to assign or cancel, and press the [MENU/OK] button.

3	The playback menu appears. Choose the [Flag Function Setting] with [+] [-] buttons, and press the [Fn2] button.

4	Choose [Cancel] or [Set] with [+] [-] button, and press the [MENU/OK] button.
	When a file has been assigned, the symbol appears on the screen. The symbol disappears when the Flag Function Setting has been set to [Deselect].

5	To assign / deselect multiple files at the same time, press the wide-angle button (lower side on the zoom button) in the step 2 above to go to the thumbnail View, and press the [MENU/OK] button.

6	Proceed to the step 3 above. The thumbnail view will be displayed.
	Choose a file in the thumbnail view with [Fn1] [Fn2] [+] [-] buttons (Directional pad), to display the file you want to set or cancel for the flag assignment, and press the [MENU/OK] button. If you choose a wrong file, press the [MENU/OK] button again to deselect the file. The flag symbol will be displayed. Up to 20 files can be assigned.

[Caution]

• • •If the name of the file assigned to [Flag Function Setting] is changed using a computer, the file is canceled from [Flag Function Setting].
  • •When the contents of the internal memory are copied to an SD memory card, the files assigned to [Flag Function Setting] in the internal memory are canceled.
  • •When a file in an SD memory card is assigned to [Flag Function Setting], the [CLIPINFO] folder and CLIP.CLI file are created on the SD memory card. If these are deleted, the corresponding file is canceled from [Flag Function Setting].
  • •If the name of an image file is changed using a computer, the file may not be able to be assigned to [Flag Function Setting].
  • •Only images taken using this camera can be assigned to [Flag Function Setting].

Useful LINKs:

Do you need other information? Please click any link you want from the following.

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting / Failure diagnosis
• FAQs Top
• Support Top