GXR FAQs - By Product

[Question] How do I playback images that have been assigned to [Flag Function Setting]?

Pressing the Fn (Function) button in playback allows you to display the image that has been assigned in the Flag Function Setting.

You can also display an assigned image by selecting [Flag Function Display] on the playback menu. The simple procedures for displaying an assigned image during playback by pressing the Fn (Function) button are displayed below.

1	Press the playback button.

2	The Playback menu will be displayed. Choose [Flag Function Display] with [+] [-] button, and then press the Fn2 button.

3	The assigned file with the lowest file number appears.
	Press the macro button as required. If multiple files have been assigned to [Flag Function Setting], press the macro button to display the files in ascending order of their file number.

• • •If you press the shutter release button or playback button at this point, the camera will go into a shooting mode.
  • •If no file has been assigned to [Flag Function Setting], a message is displayed and the display returns to the playback menu.
    See the FAQ below for information on how to assign a file to [Flag Function Setting].
    About the Flag function setting.
  • •When an assigned file is displayed at normal magnification, pressing the directional pad; [+] [-] [Fn1] [Fn2] buttons displays the previous or next image.
  • •You can enlarge or reduce still images with the zoom lever. You can also move the enlarged area by pressing the directional pad; [+] [-] [Fn1] [Fn2] buttons.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting / Failure diagnosis
• FAQs Top
• Support Top