GXR FAQs - By Product
[Question] How to attach the camera unit to the GXR body.
Be sure the power is off before attaching or removing the camera unit to / from the camera body.
Remove the terminal caps (the red marked in the figure below) from the GXR body and the camera unit.
Align the left side of the camera unit with the alignment mark (red marked in the figure below) on the camera body, and then slide the camera unit to the left unit until it clicks.
In order to remove the camera unit, slide the camera unit release lever (red marked in the figure below) to the right, and remove the camera unit.
[Note] Be careful not to drop the camera unit or the GXR body when attaching or removing them.
Answer ID:
EDXR00080
Date created: November 10, 2009
Date modified: May 7, 2010
Product: GXR (GR LENS A12 50mm F2.5 MACRO), GXR (RICOH LENS S10 24-72mm F2.5-4.4 VC), GXR (RICOH LENS P10 28-300mm F3.5-5.6 VC)
Operating system: --
Category: Hardware specifications
Date created: November 10, 2009
Date modified: May 7, 2010
Product: GXR (GR LENS A12 50mm F2.5 MACRO), GXR (RICOH LENS S10 24-72mm F2.5-4.4 VC), GXR (RICOH LENS P10 28-300mm F3.5-5.6 VC)
Operating system: --
Category: Hardware specifications
Useful LINKs:
Do you need other information? Please click any link you want from the following.
Do you need other information? Please click any link you want from the following.
Related Links
Quick Links