CX3 FAQs - By Product

[Question] About the [Pre-AF] feature.

When the [Pre-AF] feature is enabled, the camera will do preliminary work with focus, corresponding with changes on the subject, even if you will not yet press the shutter release half way.
The Pre-AF feature will perform when camera finds a movement of the subject, which will make focusing speed with the half-press faster, then which allows you to take a picture faster.

• About the Shooting menu operations.

In the Shooting menu, press the [ADJ./OK] button to select [Pre-AF], and then press to the right .

Press the [ADJ./OK] button to select [On], and press the [ADJ./OK] button again.

The Pre-AF feature is available when the [Focus] is set to either [Multi AF], [Spot AF], [Face-Pri.AF], [Continuous AF], or [Multi-trgt AF].

1. • •The Pre -AF is not available when the focus mode is set to either [MF], [Snap] or [infinity ∞].

Do you need other information? Please click any link you want from the following.

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting of camera operations
• Troubleshooting of USB connections
• FAQs Top
• Support Top