CX2 FAQs - By Product
[Question] How do I view MP files on a computer? (Macintosh)
The MP file viewer, VM-1, allows you to play back MP files and export still images on a Macintosh computer.
This section explains how to perform these operations, as well as how to install and operate VM-1. (The screen captures are examples with the Mac OS X 10.5.5)
Operating Systems Supported | Mac OS X 10.4-10.5 |
Macintosh computer | Macintosh computer from Apple Inc. |
Memory | Mac OS X 10.4 256 MB or more Mac OS X 10.5 512 MB or more |
Hard Disk Space Required | 5 MB or more |
Installing VM-1
-
1 Start your Macintosh computer and insert the supplied CD-ROM in the CD-ROM drive.
Double-click the [RICOH] icon. -
2 Double-click the [VM-1] folder.
-
3 Double-click the [VM-1 Installer.pkg] icon.
The [Install VM-1] screen appears.
- 4Click [Continue].
A screen allowing you to select the installation destination appears. - 5Select the disk you want to install to, and click [Continue].
- 6Click [Install].
- •To change the installation destination, click [Change Install Location...].
- •To upgrade VM-1, click [Upgrade].
- •A screen asking for your name and password appears.
-
-
7 Enter your name and password, and click [OK].
The installation completion message is displayed. - 8Click [Close].
Playing back an MP file
This section explains how to use VM-1 to playback MP files that have already been downloaded to a Macintosh computer.
- 1Open the [Applications] folder.
-
2 Double-click the [VM-1] icon.
The [VM-1] screen appears.
- 3Go to the menu bar, [File] - [Open] to choose the MP file you want to playback. Or you can open them by clicking [Select] in the [VM-1] window, and click [Open].
- •The frame in the selected MP file is played back.
- •The MP file name and frame number are displayed in the [VM-1] screen. Frame numbers up to 999 are displayed.
-
4 Select the frame you want to play back by entering its frame number or by clicking [<<] or [>>]. (See the screenshot below)
Note
- •You can also start VM-1 automatically and playback an MP file by double-clicking it or by dragging and dropping it onto the [VM-1] icon.
- •You can also playback still images in the [VM-1] screen. [<<] or [>>] are not operable during playback of still images.
- •Movies cannot be played back.
Exporting still images from an MP file
This section describes how to use VM-1 to extract a specific frame from a downloaded MP file and save it as a separate still image.
You can either export all frames in an MP file at once, or export a single frame at a time.
- 1Open the [Applications] folder.
- 2Double-click the [VM-1] icon.
The [VM-1] screen appears. - 3Select [Save Settings] from the [Tools] bar.
The [Save Settings] screen appears. - 4Click [Select], select the location where you want to save the still image, and click [Open].
- 5Click [OK].
- 6Go to menu bar, [File] – [Open] to choose the MP file you want to export. Or you can do them by clicking [Select] in the [VM-1] window, and click [Open].
- 7When selecting [All Frames]
Select [Divide Multi-Picture File] from the [Tools] bar, and select [All Frames].
All the frames in the MP file are saved individually as still images. - When selecting [One Frame]
Select the frame you want to export by clicking [<<] or [>>]. Select [Divide Multi-Picture File] from the [Tools] bar, and select [One Frame].
The selected frame is saved as a still image.
Date created: October 8, 2009
Date modified: --
Product: CX2
Operating system: Mac OS X 10.4-10.5
Category: Software Operations
Useful LINKs:
Do you need other information? Please click any link you want from the following.
Related Links
Quick Links