CX2 FAQs - By Product

[Question] Let me know about the focusing modes.

There are 7 focusing modes.

Symbol	Mode	Description
None	Multi AF	Measures the distances from 9 AF areas and focuses on the nearest AF area. This prevents the center of the picture display from becoming out of focus, and enables you to shoot with a minimum number of out-of-focus pictures.
None	Spot AF	Selects one AF area at the center of the picture display to allow the camera to focus on this area automatically.
	Continuous AF	Measure the distance from the center AF area and focuses on the subject in the center area. If the subject moves while the shutter release button is pressed halfway, the camera will track the subject while focusing continuously.
	Multi-trgt AF	Takes 7 consecutive pictures while shifting the focus to multiple positions.
	MF (Manual Focus)	Enables you to adjust the focus manually.
	Snap	Fixes the shooting distance to a short distance (approx.2.5m).
	∞(Infinity)	Fixed the shooting distance to infinity. Infinity is useful for shooting distant scenes.

• •If you use the digital zoom when [Multi AF] has been set as the focusing mode, the focusing will operate in [Spot AF].
• •In Dynamic Range Double shot mode, [Continuous AF] is not available.

The procedures for changing the focusing mode are shown below.

• 1 Turn the mode dial to a shooting mode.
  

  

• 2 Press the [MENU] button to display the shooting menu.
  

  

• 3 Press the [ADJ./OK] button to select [Focus], and then press the button .
  

  
  

• 4 Press the [ADJ./OK] button to select the desired setting.
  
  
• 5 Press the [ADJ./OK] button.
  If you select a setting other than [Multi AF] or [Spot AF], the symbol appears on the screen.
  

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting of camera operations
• Troubleshooting of USB connections
• FAQs Top
• Support Top