• Brand
  • Products
  • Store
  • Support

CX2 FAQs - By Product

[Question] How do I assign a function to the Fn (Function) button?

The procedures for assigning a function to the Fn (Function) button are shown below.

  • 1Press the [MENU] button. The shooting menu or the playback menu appears.
  • Press the [MENU] button. The shooting menu or the playback menu appears.

  • 2Press the [ADJ./OK] button Left, and then press it down Down. The setup menu appears.
  • Press the [ADJ./OK] button to the left, and then press it down. The setup menu appears.
  • If the camera is in scene mode or continuous mode - press the [ADJ./OK] button Left to select the [MODE] tab.
  • If the camera is in scene mode or continuous mode、press the [ADJ./OK] button to the left to select the [MODE] tab.
  • After that, press the [ADJ./OK] button down Downtwice to display the setup menu.
  • After that, press the [ADJ./OK] button down twice to display the setup menu.

  • 3Press the [ADJ./OK] button Right, press it up or down Up Downto select [Set Fn Button], and then press Right.
  • Press the [ADJ./OK] button to the right, press it up and down to select [Set Fn Button], and then press to the right

  • 4 Press the [ADJ./OK] button Up Down to select the setting, and then press the [ADJ./OK] button.


The items that can be set for each shooting mode are shown below.
The Fn button cannot be used for the selected function when [Miniaturize] is selected in the SCENE mode.

The items that can be set for each shooting mode
  • *The functions not marked with a circle (O) can also be assigned to the Fn button, but they will not operate if the button is pressed in the SCENE mode or the Movie mode.

See the FAQ below for information on using the Fn (Function) button.
[What is the Fn (Function) button?]
 
Answer ID: EDC09220
Date created: September 4, 2009
Date modified: --
Product: CX2
Operating system: --
Category: Hardware Operations


Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top