CX2 FAQs - By Product

[Question] What is the Multi-target AF function?

• *1:See the FAQ below for information about MP (Multi-Picture) files.

• 1 Turn the mode dial to the Auto shooting mode.
• 

• 2 Press the [MENU] button to display the shooting menu.
• 

• 3 Press the [ADJ./OK] button down to select [Focus], and then press the button to the right .
• 

• 4Press the button up and down to select [Multi-trgt AF].
• 

• 5Press the [ADJ./OK] button. The shooting screen comes back, and the symbol appears in the picture display.
• 
• The above shows the example in the picture display with the [Shooting Display Frame] On.
• What is the Shooting Info. Display Frame?

• 6 Compose your picture and half-press the shutter release button.
• 
• • •The camera automatically detects multiple focus positions.
  • • The green Ο symbol appears on the screen when a focus position is detected.
  • • The determined focus positions are displayed only during playback.
  • • If a focus position cannot be detected, the orange Ο symbol blinks on the screen.

• 7 Press the shutter release button all the way down. Consecutive shooting starts, and when the seven frames are shot, they are recorded as one MP file.

• • This function is only available in the Auto shooting mode.
• • The flash cannot be used.
• • The [Time Exposure] setting is disabled.
• • The camera shake correction function cannot be used. If [Multi-trgt AF] is set while the camera shake function is turned on, camera shake function symbol in the picture monitor is replaced.

• • If this function is turned on when using the digital zoom, the digital zoom is disabled and shooting is performed at the maximum magnification for the optical zoom (10.7x).
• • [White Balance] functions according to the [Auto] setting, even if it is set to [Multi-P AUTO].

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting of camera operations
• Troubleshooting of USB connections
• FAQs Top
• Support Top