CX2 FAQs - By Product / Support / Digital Camera　| Ricoh Global

[Question] What is the Auto bracketing?

The Auto bracketing function automatically takes three consecutive shots at three exposure levels (-0.5EV, ±0, and +0.5EV) based on the set exposure level.

The procedures for Auto bracketing are shown below.

1 Turn the mode dial to a shooting mode.
2 Press the [MENU] button to display the shooting menu.
3 Press the [ADJ./OK] button down to select [Auto Bracket], and press the button .
4 Press the [ADJ./OK] button to select [On].
5 Press the [ADJ./OK] button.
The display returns to the shooting screen, and the symbol is displayed on the picture display.
6 Press the shutter release button to shoot the picture. 'Recording' is displayed.

Three consecutive shots are taken at -0.5EV, ±0, and +0.5EV based on the set exposure compensation setting. The three still images displayed on the picture display after shooting are, from left to right, at -0.5EV (darker), standard exposure compensation setting, and +0.5EV (brighter).

•	The exposure compensation can be changed using the shooting menu. About the Shooting menu operations.
•	[White Balance] functions according to the [Auto] setting even if it is set to [Multi-P AUTO].
•	This function is not available in Dynamic range double-shot, Easy shooting mode or Continuous mode.
•	This function cannot be used when [Focus] is set to [Multi-trgt AF].
•	The flash cannot be used.
•	The [Time Exposure] setting is disabled.
•	You can toggle this function on and off by pressing the Fn (Function) button if [AT-BKT] has been assigned to the Fn button using [Set Fn Button]. See the FAQ below for more information about [Set Fn Button]. How do I assign functions to the Fn (Function) button?

Page Top

Answer ID: EDC09210
Date created: September 4, 2009
Date modified: --
Product: CX2
Operating system: --
Category: Hardware Operations

Useful LINKs:
Do you need other information? Please click any link you want from the following.