CX1 FAQs - By Product / Support / Digital Camera　| Ricoh Global

There are six focusing modes.

Available Focusing Modes

Symbol	Mode	Description
None	Multi AF	Measures the distances from 9 AF areas and focuses on the nearest AF area. This prevents the center of the picture display from becoming out of focus, and enables you to shoot with a minimum number of out-of-focus pictures.
None	Spot AF	Selects one AF area at the center of the picture display to allow the camera to focus on this area automatically.
	Multi-trgt AF	Takes 7 consecutive pictures while shifting the focus to multiple positions.
	MF (Manual Focus)	Enables you to adjust the focus manually.
	Snap	Fixes the shooting distance to a short distance (approx.2.5m).
	∞(Infinity)	Fixed the shooting distance to infinity. Infinity is useful for shooting distant scenes.

•The default focusing mode is Multi AF.
•If you use the digital zoom when [Multi AF] has been set as the focusing mode, the focusing will operate in [Spot AF].

The procedures for changing the focusing mode are shown below.

1	Turn the mode dial to a shooting mode.
2	Press the [MENU] button to display the shooting menu.
3	Press the [ADJ./OK] button to select [Focus], and then press the button .
4	Press the [ADJ./OK] button to select the desired setting.
5	Press the [ADJ./OK] button. If you select a setting other than [Multi AF] or [Spot AF], the symbol appears on the screen.

Answer ID: EDC09021
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations

Useful LINKs:

Do you need other information? Please click any link you want from the following.