CX5 FAQs - By Product

[Question] About the [Pre-AF] feature.

When the [Pre-AF] feature is enabled, the camera will do preliminary work with focus, corresponding with changes on the subject, even if you will not yet press the shutter release half way.
The Pre-AF feature will perform when camera finds a movement of the subject, which will make focusing speed with the half-press faster, then which allows you to take a picture faster.

The Pre-AF feature options are available in the following; in the Shooting menu - [Pre-AF].
For the operations on the Shooting menu, see the FAQ below.

About the Shooting menu operations.

In the Shooting menu, push the [ADJ./OK] button

to select [Pre-AF], and then press to the right

Push the [ADJ./OK] button

to select [On], and press the [ADJ./OK] button again.

The Pre-AF feature is available when the [Focus] is set to either [Multi AF], [Face-Pri.Multi], [Subj.Tracking], [Spot AF], or [Multi-trgt AF].

Pre-AF feature is available when the [Focus] is set to either [Multi AF], [Face-Pri.Multi], [Subj.Tracking], [Spot AF], or [Multi-trgt AF].

[Note]

•The Pre -AF is not available when the focus mode is set to either [MF], [Snap] or [infinity ∞].

Page Top

Answer ID: edc05079
Date created: February 18, 2011
Date modified: --
Product: CX5
Operating system: --
Category: Hardware specifications, Hardware operations

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top